Parking Brake - Quinny ZAPP Guia Del Usuario

Ocultar thumbs Ver también para ZAPP:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Assembly
4

Parking Brake

Always use the parking
brake, even when standing
still for only a few
moments! Push down on
the red pedal (P) behind
the rear wheel to set the
parking brake (Figure 4).
Push the opposite pedal to
release the parking brake.
5
Attach Shopping
Basket
Locate two loops in the
area under the footrest.
Put strap end through
loop and secure snap
(Figure 5a).
Locate one ring above
each rear wheel. Put
strap end through each
ring and secure snap
(Figure 5b).
6
Canopy
Slide off the hinge covers
from the hinge points
and store them for future
use (Figure 6).
4
5
5b
5a
6
Slide both ends of the
canopy into the hinge
points until they are
securely in place
(Figure 6a).
Fasten the canopy to the
top of the stroller using the
snaps and adhesive patches
(Figure 6b). Check to make
sure the canopy is fastened
securely.
The canopy can be adjusted
to two different positions:
folded out or folded back
(Figure 6c).
To remove the canopy:
Unfasten the snaps and
adhesive patches and pull
the canopy out of the hinge
points. Slide the hinge
covers onto the hinge
points (Figure 6d).
CAUTION
When removing canopy,
always slide hinge
covers back on the
hinge points.
4
TM
6a
6b
6c
6d

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

01474

Tabla de contenido