Look 795 RS Serie Manual De Montaje página 38

EN
Front brake (Ctd.)
6 / Engage the bend in the tiebar ⑩ (Fig. 18).
7 / Tighten the brake liner with the plastic
screws  (Fig.11).
8 / Pass the cable through the grommet and
position it in the right-hand outer lever.
9 / Hold the cable, using the cable grip so that
both outer levers follow the line of the fork
(Fig.19). The adjustment can be completed
as required using the tensioner adjuster (see
ADH2 handlebars instructions).
10 / Once the adjustment is complete, tighten
the cable using a 3mm Allen key to a torque of
6 Nm (Fig. 20).
11 / Adjust the brake (see ADJUSTMENT table)
12 / Cut the cable approx. 2 cm after the cable
grip and crimp a cable end. Make sure the
assembly is in the groove provided for this
purpose and tighten the caps using a 2mm
Allen key to a torque of 1 Nm.
13 / Activate the lever around ten times and
make sure the brakes are working properly.
Check the play between the shoes and the rim
as well.
36
û
NO
Fig. 18
Fig. 19
ü
OK
Fig. 20