gaviota KYMA Manual De Instalación página 51

Step 20. (Common)
Assemble and attach the supports of the charge profile covers and canvas,
with three DIN7981 4.2x25 screws on each side and a Phillips screwdriver.
COVER FIXATION
Step 21. (Common)
Assemble and fix the covers to the charge profile with a DIN7982 2.9x9.5 screw
on each one, right and left, with a Phillips screwdriver.
All dimensions in mm, unless otherwise stated.
Step 22. (Common)
CANVAS FIXATION
Step 23. (Common)
Move the arm safety band towards the elbow, to have enough space to fix the
arms to the charge profile. This step will be carried out in each one of the arms
in the configuration.
The arms have a heavy spring. Be careful during this step.
Screw the connector to the flange with two DIN7991 M6x20 screws. The flange
was put in place in Step 18, 19 (Type 1 and 2). Use a no. 4 Allen key. This step
will be carried out in each one of the arms in the configuration.
KÝMA
51