Amana ADB-2 Guía De Uso Y Cuidado página 9

Cycles, Options and Lights
Options
In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload.
OPTION
Sanitize
(select models)
Hi Temp
Wash
Heated Dry
Delay
* Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization.
CAUTION – In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner
of the door as the heat dries your dishes. The vapor is hot and may cause minor burns.
DESCRIPTION
Sanitizes dishware. When the cycle monitor recognizes that
proper conditions have been met, a Sanitized light will activate
at the end of the cycle. Sanitization may not be achieved if
there is an interruption of the cycle, power failure or if the
incoming water temperature is below 120° F (49° C).
Hi Temp Wash provides additional heat during the wash portion
of the cycle, which ensures proper water temperature for better
cleaning and drying results. It also adds an additional rinse to
the cycle which improves results in hard water situations.
For enhanced drying results select this option. When Heated
Dry is not selected, towel drying of some items such as plastic
and items with non-stick surfaces may be necessary and more
moisture may be noticed adhering to the dishwasher interior.
In models with plastic interiors, it is normal to notice vapor
escaping from the door vent as the heat dries your dishes.
Vapor will escape even if Heated Dry is not selected.
Used to automatically start the cycle at a later time. See
page 10 for instructions.
CAUTION
8
USE WITH CYCLES
Heavy Wash*
Normal Wash*
Quick Wash*
Auto Wash*
(select models)
All cycles
(except Rinse Only)
(select models)
All cycles
(except Rinse Only)
(select models)
All Cycles