Rowenta IS5100 Modo De Empleo página 21

• Place the water tank on the base (fig.14). If you have any difficulty to
placing it, check that the water tank is not the wrong way round.
fig.11
USE
Warning : Never steam a garment while it is being worn.
The hose and steam head may become hot during use. This is perfectly
normal. Be careful and avoid any prolonged contact.
• Only operate the steamer on the floor clear of any materials which
may obstruct the base of the steamer (flat and horizontal surface). Do
not obstruct the openings on the lower part of the appliance.
• If necessary, expand the pole to the desired height by unlocking it,
pulling it gently and locking it again.
• Plug in the power cord, a beep sound is emitted and the power light
on the front of the appliance turns on.
• Hold down the Set/On-Off button located on the steam head for 2 to 3
seconds to switch on the steamer.The steamer starts on the minimum
steam output setting. The steam amount can be set to the desired level
by successively pressing the Set/On-Off button (5 different settings to
perfectly adapt the steam output to all fabric types, from delicate to
thick ones). (fig.17)
• The steamer produces steam in 60 seconds, when in max position of
variable steam.
• Put the garment directly on the rotating hanger or on another hanger
that you can hang up to the hook. To steam pants, we advise you to
use the two hangers as described in the picture.
• Grasp the steam head with the steam vents pointing away from you.
Start steaming by brushing material lightly with the grain of the fabric
in an up/down vertical motion. The fabric brush opens the weave of
the fabrics for better steam penetration.
• Start at the top the garment and gradually move downward.
steam in a vertical position.
fig.12
(fig.18)
21
fig.13
(fig.15)
(fig.16)
(fig.19)
fig.14
lways