Error Code Display, Battery Version - VLX 416S Manual De Instrucciones

The battery discharg-
es too fast during use,
even though it has been
charged correctly and
when tested with a hy-
drometer at the end of
recharging, it turned out
to be uniformly charged
(battery powered versions
only)

ERROR CODE DISPLAY, BATTERY VERSION

the battery is new and does not deliver 100% of
its expected capacity
the machine is being used at maximum capac-
ity for continuous periods and the working time
the electrolyte has evaporated and does not
cover the plates completely
.
the battery must be "run-in" by performing 20-30
charges and discharges to obtain maximum per-
formance
if possible, use batteries with a higher capacity
or replace the batteries with others charged pre-
viously
top up all elements with distilled water until the
plates are covered then recharge the battery
.
EN
Brush short circuit error.
Overcurrent error
Suction short circuit error
Overcurrent error
Electronic board temperature error
Brush thermal protector error
Machine on with battery charger
powered error
Excess battery voltage error
32