Accessories
The following accessories are available to customize your SP100 Pump. Contact your Tuthill Representative if you have questions, or would like to
order any of the accessories listed below.
Part #
KITS05WMA
KITS05FRH
KITS05MUF
KITS05WCH
KIT180MAMPS
KITS05NDEF
Regulatory Compliance
The Tuthill SP100 1/2" Air Operated Diaphragm Pump has been tested and complies to the rigid standards for certification by the following regulatory
agencies.*
Polypropylene (non-conductive) models comply with European standards:
●
2006/42/EC – Machinery
●
BS EN ISO 12100:2010, Safety of machinery – General principles for design – Risk assessment and risk reduction
●
BS EN 809:1998 – Pumps and pump units for liquids – Common safety requirements.
Models for use in ATmosphere EXplosive (ATEX) that comply with European standards:
●
94/9/EC - (until April 19th, 2016) and 2014/34/EU (after April 20th, 2016) - Directive on equipment intended for use in potentially
explosive environments.
●
EN 13463 - 1 - Non-electrical equipment for use in potentially explosive atmospheres: Part 1: Basic method and requirement.
●
EN 13463 - 5 - Non-electrical equipment for use in potentially explosive atmospheres: Part 5: Protection by constructional safety "c".
*Refer to regulatory information printed on the top of the pump body for specific pump compliance.
Learn more about Tuthill Corporation and our family of high quality, value minded products at:
Accessory
Wall Mount Bracket
Filter / Regulator Kit
Muffler
Assembly Wrench
Tote Plate (for IBC tote)
Manual Nozzle Kit
www.tuthill.com
12
Description
Stainless steel bracket for wall mount applications of the
SP100 Pump.
Air line filter, regulator, and hose
Muffler for air exhaust
Special service tool for use on manifold and fluid retainer
rings (4A & 4C on diagram page 5).
Tote plate, attaching hardware
Manual nozzle and hose
Tuthill Corporation
8825 Aviation Drive
Fort Wayne, IN 46809
1-800-634-2695
1-260-747-7524
DC000679-001 Rev.5