Velleman PEREL GMT Guia De Inicio Rapido página 3

From the Normal Mode, press the PGM button twice to enter the Program Setting Mode. 12:00 and the current day
will flash to indicate you are in this mode.
Setting the Start Time and Watering Days
Press HR and MIN to adjust start time.
Press DAY to change the program day. ON and OFF appear on
the display to indicate whether the flashing day is a programmed
day or not. Press ON/OFF to switch the days from OFF to ON
and vice versa. In the following diagram, Sunday, Tuesday,
Wednesday and Thursday are programmed days. In these four
days, the valve will op at 08h30 AM.
Watering Every Other Day or Every Third Day
Press DAY until you see a flashing 2 or 3
nd rd on the right side of
the display to water every second or third day respectively.
Press ON/OFF.
Setting the Watering Time
From Normal Mode, press PGM three times and press HR and MIN for the duration of Program 1.
For the following diagram, the opening time is entered for 00h25.
Press PGM 5 times to modify the start time of Program 2, 7 times
to modify the opening time of Program 3, 9 times to scroll through
Program 4. Press PGM 10 times to return to Normal Mode.
Active Program
The valve will open when the current time and day match one
of the entered programs. The LCD display will be cleared
except for the active program number, the time field indicating
the remaining opening time and the OPEN indication.
The diagram shows that the valve is open and will remain open for 1 hour and 30 minutes, as entered in Program 1.
Manual Opening and Closing
Opening
If the valve is closed, pressing ON/OFF will open the valve.
OPEN will appear while the display changes to 00:00.
Enter the desired opening time within 3 seconds by using the
HR and MIN buttons. When there is no key pressed within 3
seconds, the valve will open and stay open until it is closed
manually.
The diagram shows a watering time of 9 minutes. Press
ON/OFF within 3 seconds. Press HR and MIN to enter the
desired period. The display shows the time, day and OPEN.
This program will not be saved into the memory.
GWT 3 PEREL