Replacing The Halogen Lamps; Cleaning The Appliance - GE CGP6010I Manual De Uso Y Cuidado

Replacing the Halogen Lamps

Model with halogen bulb
1. Remove the lighting port (fig. 3).
2. Replace the G4-20W-12V halogen bulb.
3. Replace the lamp by following these steps
in reverse order.

Cleaning the appliance

WARNING: UNPLUG THE APPLIANCE (BY DISCONNECTING THE
PLUG OR TURNING OFF THE CIRCUIT BREAKER) BEFORE PERFORM-
ING ANY MAINTENANCE OR CLEANING JOB.
Part Description
Top surface and Never use metallic scouring pads,
accessories abrasive products or stiff bristles
brushes.
Filter cartridge The filter retains greasy vapors and
dust. This component ensures an
important role in the performance
of the hood. In the event of heavy
stains, use a nonabrasive cream
detergent and rinse it with clean
water.
Active Carbon This filter retains odors and must be
Filter (depending changed at least once a year de-
on model, or op- pending on the frequency of use.
tional) Order these filters from your dealer
and write down the date the filter
was changed.
Fig. 3
Cleaning procedure
To clean the body and the light
port, you should only use commer-
cial household cleaning products
diluted in water and then rinse us-
ing clean water, drying with a soft
cloth.
Use a commercial household clean-
ing product then thoroughly rinse
and dry the hood. These filters can
be cleaned in a vertical position in a
dishwasher. (Do not allow them to
contact dirty dishes or silverware).
51