Troubleshooting - INQUA 1000 Instrucciones De Uso

TROUBLESHOOTING

Fault
The compressor
does not start up.
No aerosol is
coming out of the
nebuliser.
Please contact your local sales partner or the manufacturer

if the motor is unusually loud,

if the device switches off automatically after a few seconds,

if no compressed air is generated,

if the recommended procedure is unsuccessful.
Possible cause
The power adapter
is not plugged into
the mains socket
properly.
The power adapter
cable is not plugged
into the compressor
properly.
The nebuliser nozzle
is blocked.
The connection
tubing is not
connected properly.
The connection
tubing is leaking.
Procedure
Check that the power
adapter is seated cor-
rectly in the mains
socket.
Check that the power
adapter cable is
seated correctly in the
compressor power
cord socket.
Clean the nebuliser.
Check that both ends
of the tubing are
seated properly.
Replace the connec-
tion tubing.
en
47