Selftest Ok" Appears On The Screen; Set Up Your Terminal; Entering Set-Up - Boundless VGB10 Información De Instalación Y Funcionamiento

1-4 Installation and Set-Up

"Selftest OK" appears on the screen

The terminal takes a few seconds to warm up and complete its
power up self-tests. Then, the terminal should display "Selftest OK."
If a problem occurs, go to Chapter 3.

Set up your terminal

Use Set-Up to examine or change the terminal operating
features, such as the transmit speed, receive speed, or the
language, The Set-Up menus in this section will get you started
in operating the terminal. Only the basic Set-Up feature is
performed with this procedure. There are many more Set-Up
features in the terminal that you may wish to change.
Before changing the Set-Up features, contact your System
Manager, if necessary, for information on the terminal type,
terminal ID to host, and the communication settings.
Printer operations are suspended upon entering Set-Up and are
resumed upon exiting Set-Up.

Entering Set-Up

To enter Set-Up, perform the following procedure:
On a ...
ANSI-style keyboard
PC keyboard
Press ...
F3
Caps Lock+Print Screen
Refer to ...
Figure 1-1
Figure 1-2