Tabla de contenido
Troubleshooting
If your projector does not seem to be functioning properly, please check the
following before you contact an authorized service center.
Symptom
The projector does not turn
on after pressing the power
button for more than 8 seconds.
The projected image is blurred. 1. Adjust the focus by using focus
The surface temperature of
the projector is hot .
The projector does not display
when connecting to a
notebook PC.
Abnormal performance
User Manual
Check Point
Ensure the battery is fully charged.
wheel.
2. Check if the projection lens is
dirty, clean it if required.
It is normal for this projector to
generate moderate heat during
operation.
1.Check if the HDMI cable is
plugged correctly.
2. Make sure the PC has been
switched to projector display.
If the projector is running slow,
freezing, crashing or locking up
during the operation, you can
try to insert a slim, pointy object
into the reset hole to trigger a
hardware reset.
5
Tabla de contenido
