Getting Started - Numark NS FX Guia De Inicio Rapido

BOX CONTENTS
NSFX
2 bumpers
4 screws
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your NSFX. Registering your product ensures that we can
keep you up-to-date with any new product developments and provide you with world-class technical support,
should you run into any problems.

GETTING STARTED

To get started using your new NSFX with NS7:
1. Visit www.serato.com/downloads/itch/numark-nsfx and download
the latest version of Serato Itch with built-in effects!
2. Assemble NSFX (see ASSEMBLY INSTRUCTIONS below).
3. Connect NS7 to your computer.
4. Connect NSFX to your computer.
5. Open the latest version of Serato Itch!
ASSEMBLY INSTRUCTIONS
1. With the prongs of your
NS7's laptop
removed from the main
piece, use a Phillips-
head screwdriver
remove the two large
screws and
from each prong.
2. Replace the
bumpers and screws with
the new ones included
with the NSFX.
Note: Use only
screws included with the
NSFX to secure the new
bumpers. (They
smaller than the original
ones.)
3. Insert the prongs into the
slots of the main bracket
of the laptop stand. Do
not use the
thumb screws that were included with the laptop stand.
4. Place NSFX on top of the main bracket of the laptop stand, inserting the thumb screws of the NSFX
into the holes in the bracket. Tighten the screws to secure NSFX to the laptop stand.
5. Connect the NSFX's attached USB cable to a free USB port on your computer.
Before connecting NSFX to your computer, visit
www.serato.com/downloads/itch/numark-nsfx
to download the latest version of Serato ITCH.
1
stand
to
bumpers
original
3
the
are
original
IMPORTANT:
1
Note: In order to use your
NSFX, you will need two
free USB ports on your
computer – one for NS7,
one for NSFX.
2
4