Konica Minolta PULSOX-300i Manual Del Usuario página 20

2) Reading the display
When the instrument is turned ON, all the elements of the LCD will light up.
The pulse level, pulse rate and SpO
surement.
3) Ending the Measurement
Press the Power button for a long time, the measurement is finished and
the Power is off.
About Auto Power-Off function
By connecting the insterument to a computer and using the optional
software,the time to be elapsed from power-on (start of measurement) to
power-off (end of measurement) can be set as the auto power-off timer.
If an auto power-off timer is set, the measurement is finished automati-
cally in the time after power-on.
Regarding the memory function
• The memory built into the PULSOX-300i will continue to hold data
even if the battery is removed.
• A maximum of 300 hours of measurement data can be stored; i.e., 10
hours of measurement data can be stored for 30 persons. Storage for
measurement data is set up in 30-minute blocks, so even if the dura-
tion of measurement data is less than 30 minutes, it will be treated as
a 30-minute block. For this reason, if measurement data with durations
of shorter than 30 minutes are stored, the actual measurement dura-
tion will be different from the stored duration, and the maximum stor-
able time will be shorter than 300 hours.
• The maximum storable number of data files is 399 files. After that, the
No. 400 data file will be stored as data file No. 1, overwriting the previ-
ous No. 1 data file.
4. NOTES ON USE
• This instrument should be used under the following operating condi-
tions.
• Temperature of 0 to 40°C (32 to 104°F), relative humidity of 30 to
85%, with no condensation.
• Atmospheric pressure of 700 to 1060 hPa (altitude of –400 to
3000m).
E4
value are displayed during mea-
2