Operation Instructions
After the system check, one of three
displays will appear:
wheel icon when the fifth wheel is
in the proper position for coupling.
There is not a kingpin in the fifth
wheel lock and the fifth wheel
lock mechanism is in the unlocked
position (Figure 3). Follow the
coupling procedure in the Fifth Wheel
Owner's Manual that came with your
fifth wheel.
NOTE: If you will be traveling without
a trailer, this display will remain
lit for approximately seventeen
(17) minutes before turning
off. The display will turn back
on during the next coupling
process, or the next time it is
turned on.
lock icon when the fifth wheel is
properly coupled to a trailer kingpin.
The kingpin is in the lock at the proper
height and the lock mechanism is
fully closed in the locked position
(Figure 4). Proceed with a visual
inspection. The display will remain lit
for approximately eight and one-half
(8-1/2) minutes before turning off.
NOTE: Although the display turns off,
the Electronic Lock Indicator
(ELI) is still functioning normally
and monitoring the fifth wheel
coupling. The display will activate
if an error occurs or the coupling
condition changes.
open lock icon when the fifth wheel is
not properly coupled to a trailer kingpin.
The open lock icon is flashing red in
this mode (Figure 5). The Stand-Alone
On-Dash mounted unit will also display
one of nine (9) error codes (see page 8
for error code descriptions).
6
Figure 3
Figure 4
Figure 5
XL-FW10062UM-en-US Rev A · 2011-12-01 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
READY TO COUPLE
FIFTH WHEEL ICON IS YELLOW
ON-DASH
DISPLAY
PROPER COUPLE
CLOSED LOCK ICON IS GREEN
ON-DASH
DISPLAY
IMPROPER COUPLE
OPEN LOCK ICON IS FLASHING RED
ON-DASH
DISPLAY
IN-DASH
DISPLAY
IN-DASH
DISPLAY
IN-DASH
DISPLAY