Ebac 3000 Serie Manual De Instrucciones página 66

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Troubleshooting Cont...
The unit is icing up
The unit is operating as normal
but is creating a lot of ice at the
.
rear of the unit
Diagram C
The unit is leaking
The unit is operating as normal
.
but is leaking water
Diagram D
There is a problem with the
display
The unit appears to be
operating as normal but the
display is incorrect (Froze / No
Fan Symbol etc)
The unit is damaged
The unit has been delivered
damaged or has become
damaged since purchase.
If the damaged part cannot be replaced we recommend you contact the customer service team
on +44 (0) 845 634 1392, or from the retailer you purchased from, who will advise the best
course of action.
All information contained in this section can be found on our website and in the unlikely event of needing to return your
Alternatively call our customer service team on +44 (0) 845 634 1392 during normal hours, or the retailer
Dehumidifier serial number (located on a rating plate behind the water container)
Your postcode and when and where you purchased your dehumidifier.
65
Is there thick ice on the coil
which does not disappear?
Is the unit being run in the
correct environment?
Is the back of the unit
leaking?
Is the container leaking?
Is the unit on a level surface?
Have you tried resetting the
unit?
Can the damaged part be
replaced?
dehumidifier for a repair, please go to:
www.ebac.com/contact
you purchased from with the following information to hand:
It is normal for a thin layer of
ice or frost to form on the coil
– See Diagram C, but this will
disappear when the unit
defrosts.
The unit should be run in a
domestic environment with an
ambient temperature of 3⁰C
or above?
Ensure that the drainage
bung is inserted correctly in
the rear of the unit – See
Diagram D.
Check that the container has
no leaks by filling it with water
over a sink.
The unit may leak if it is not
placed on a level surface.
Your dehumidifier should
always be placed on a level
surface for this reason.
Unplug the unit and plug it
back in. This will reset the unit
and may resolve the problem.
If the Water Container / Filter
Housing are damaged, we
can supply a replacement
without the need to return the
unit to us.
GB
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

3650e3850e

Tabla de contenido