Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2 Activate your player's digital output. (See
"AUDIO SETUP" on page 11).
Digital multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a
multi-channel audio/video receiver that supports
one or more of the audio formats supported by
your player, including MPEG 2, Dolby Digital,
and DTS. Check the receiver manual and the
logos on the front of the receiver to verify this.
Note
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
• To play six-channel digital surround sound
through a digital connection, your receiver must
have a digital multi-channel decoder.
• To see the audio format of the current DVD
displayed on the screen, press AUDIO.
• Your player does not perform internal
(2-channel) decoding of DTS sound tracks. To
enjoy DTS multi-channel surround, you must
connect your player to a DTS-compatible
receiver through one of your player's digital
audio outputs.
Using your DVD player
Turning your player on and off
To turn your player on and off:
1 Plug the power cord into the back of your
player and into an electrical outlet.
2 Press the POWER button to turn on your
player.
3 Press the POWER button again to turn off
your player.
Playing a disc
To play a disc:
1 Turn on your player and your TV.
2 Press OPEN/CLOSE (
tray.
3 Load the disc into the tray, with the label side
up.
4 Press OPEN/CLOSE (
Playback starts automatically. If playback
does not start, press PLAY (
remote control or PLAY/PAUSE
player to start the playback.
5 To stop the playback, press STOP (
The player notes the stopped point,
depending on the disc, and "Pre Stop"
appears on the screen.
6 Press PLAY (
the stopped point). To start playback from the
beginning of the disc, press STOP (
again, then press PLAY (
starts playback at the beginning of the disc.
7 Press OPEN/CLOSE (
then remove the disc.
10
) to open the disc
) to close the tray.
) on the
on the
).
) to resume playback (from
)
). Your player
) to open the tray,
www.insignia-products.com
Insignia NS-UPDVD 1080p Upconvert DVD Player
8 Press OPEN/CLOSE (
tray, or press POWER (
closes automatically and the player turns off.
Note
If parental controls are set and the DVD is not
within the rating settings, you must enter the
password. See "SYSTEM SETUP" on page 11.
Playback options
Menu play
To play a DVD using the disc menu:
1 With a disc in the player, press MENU. The
DVD menu opens.
2 Make your selection from the menu, then
press ENTER to start playback.
On some DVDs, press MENU repeatedly to
return to the root menu.
- Or -
1 Press TITLE. The DVD menu opens.
2 Make your selection from the menu, then
press ENTER to start playback.
On some DVDs, press TITLE repeatedly to
return to the root menu.
To play a VCD 2.0 disc, press PBC to turn the
menu on or off, then press RETURN to return
to the menu.
Program play
Program playback lets you enter the order in
which a disc will play chapters or tracks.
To play a DVD, CD, HD-CD, or JPEG disc
using program play:
1 With a disc in the player, press PROGRAM.
The Program selection box opens.
DVD and JPEG discs
CD and HD-CD discs
2 Press
/
/
then press the number buttons to enter the
Chapters or Tracks you want to play, in the
order you want to play them.
3 Press
/
/
press PLAY, then press ENTER to begin
programmed playback.
4 During playback, press PROGRAM to display
the program order on the screen.
•
To clear the program, press
to select CLEAR, then press ENTER.
) to close the disc
). The disc tray
or
to navigate the menu,
or
to select PLAY, or
/
/
or
Capítulos
Tabla de contenido
