System Lay-Out - Ribind RAPID N Manual De Instrucciones

SYSTEM LAY-OUT

280/11,2"x300/12"
❶
❷
❸
❷
❸
❷
❸
1 - RAPID N barrier
2 - Photoelectric cells
3 - Galvanized column for P.E. cells
4 - Strip with Photo electric cells
Parts to install meeting the EN 12453 standard
COMMAND TYPE
with manned operation
with visible impulses (e.g. sensor)
with not visible impulses
(e.g. remote control device)
automatic
* a typical example are those shutters which do not have access to any public way.
A: C ommand button with manned operation (that is, operating as long as activated), like code ACG2013.
B: Key selector with manned operation, like code ACG1010.
C: S afety edges, like code ACG3010 and/or other safety devices to keep thrust force within the limits
of EN12453 regulation - Appendix A.
D: Photocells, like code ACG8026.
❺
5 - Magnetic loop
- Key selector
- Tuned aerial
USE OF THE SHUTTER
Skilled persons Skilled persons Unrestricted
(out of a public area*) (public area)
A B
C C
C C e D
C e D C e D
6000/236"
T
ECHNICAL FEATURES
❹
Ambidextrous irreversibile operator endowed with a control
panel, used for the intesive movement of boom arms from
3 to 6 m long.
❷
The cabinet of the operator is treated with cataphoresis and
thermal spray coating.
The barrier boom can be supplied as a single piece or, in the
case high objects may hinder its travel, you can require it in the
❸
articulated version, specifying the height of this obstacle from
the ground (Pic. 11).
The barrier boom with RIB profile is constructed for being fitted
with a pneumatic safety strip or with a photocell strip (Pic. 1 -
14).
N.B. You must make installation features comply with laws and
❷
standards in force.
❸
TECHNICAL
DATA
Max. boom lenght
❷
Opening time
❸
EEC Power supply
Motor capacity
Power absorbed
Capacitor
Max. torque
Power supply
Motor capacity
Power absorbed
Capacitor
2
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
use
Service
Guaranteed consecutive cycles
C e D
Lubrification
C e D
Weight of electroreducer
C e D
Working Temperature
Protection IP
A
SSEMBLING RAPID N
After you have cemented in the base plate where you want it,
mount RAPID N using the nuts provided and a no. 19 hexagonal
wrench.
25
25
Measurements
in mm/inch
1
RAPID N
m/in 6/236"
s 6
230V~ 50Hz 60Hz
W 242 285
A 1,07 1,31
mF
10 10
Nm/lbsm 155/70 141/64
120V~ 60Hz
W 186
A 2,07
mF
25
Nm/lbsm 105/47,7
n° 2400 - 6s/2s
n° 2400 - 6s/2s
n° 1500 for boom 3-4-5-6 m
100%
n° 1500 for boom 3-4-5-6 m
IP MELLANA 100
kg 62
°C -10 ÷ +55
IP 54
G
B