Tabla de contenido
05.
Risks and Safety Procedures
Risques et Procédures de Sécurité · Riesgos y procedimientos de seguridad
Riscos e Procedimentos de Segurança
Risks
Counterblow
Finger / toe injuries
Projection of Objects
Dragging or locking of moving elements
Contact with hot surfaces
Noise
Inhalation of toxic gases
Fire and explosion
Factors which determine a
dangerous situation
When beginning to w
re is rapid
engine retraction.
Presence of the cutting element.
Rotation at the level of the low
with the risk of contusion.
Rupture due to a break in the cutting
element.
Detachment of the blade.
Projection of debris and other residues
originating from the cutting process.
Access to the transmission of rotating
components.
When the engine is working there are
engine parts which reach high
temperatures (e.g
exhaust and the
crankcase).
Permanent deterioration o
Stres
s
with oral communication.
Release of harmful gases during its
operation.
Sparks after starting the engine may set
r
Description of the solution
Place warning on the engine.
Pull the starter in the correct position.
Place warnings on the machine.
Read Point 2 of the Instructions Manual
(General Safety Information)
Design the drum in order to absorb any
impact.
Plac
xed protector
rder to deny access to
moving mechanical elements which
should never be removed when in
operation.
Loosen the components only with the
help of a tool.
Side projector in order to protect the
user from the material which is
projected by the cutting proces
as to avoid projection of debris to long
distances.
Plac
xed protector
access to moving mechanical elements.
for any r
you remov
must put them back immediately before
undertaking any operation with the
machine.
Place warnings on the engine showing
the dangers of high temperatures.
Information included in the Instructions
Manual on saf
transporting and storing.
Information included in the Engine
ference
Instructions Manual. We advise the use
of ear protectors.
Warnings on the engine showing the
danger.
Read Point 2 of the Instructions Manual
(General Safety Information)
Place warning on the machine.
Information on starting and handling
the machine.
of iron
well
rder to deny
you
16
Tabla de contenido
