Festo CMXR-C2 Manual De Instrucciones página 13

1 User
Intended use
The CMXR−C2 multi−axis control system is a modular control
system composed of a central control unit CMXR−C2 with
various communication interfaces, input/output modules,
field buses and a handheld terminal.
The CMXR−C2 multi−axis control system is used for
activating kinematics from the Festo Modular System;
tracking functions and path switching points are also
available. Programming is done in the language FTL
(Festo Teach Language).
Note
This brief overview is part of the documentation
package. It serves only as initial information and does
not replace the complete documentation, which can be
downloaded as a set of PDF files from our website
(www.festo.com).
S Observe the information and safety instructions in
the complete description of the multi−axis controller
unconditionally.
S Please consult your local Festo Service or write to the
following e−mail address if you have any technical
problems: [email protected]
Commissioning and parameterization are carried out:
with the FCT software package and the CMXR−C2
plugin via the Ethernet interface,
with the handheld terminal CDSA−D1−VX.
Festo GDSP−CMXR−C2−SY−ML 1008a English
instructionsEnglish
13