Trouble Shooting /Specification - Lenco DR-05 BT Guia Del Usuario

Standby power consumption
For you convenience, we have list some methods to solve some common problems you
may encounter when you use the system. If the problem occurs repeatedly, contact the
nearest maintenance center.
Problems
Power supply doesn't work.
No sound from the speaker.
The screen is blank.
The sound is weak or of
poor quality; I can hear a
burbling noise on some
stations.
Specifications
Power source
Power consumption
FM frequency
FM/DAB presets
Bluetooth range
Bluetooth version
Input jacks
Operation condition
Trouble shooting
Power plug is not fully inserted
into the power socket.
Weak signal reception;
Volume is not turned up;
No pairing with Bluetooth
device.
This may occur if the audio
broadcaster changes the label
of a service or remote a label
while tuning the stations.
Other devices such as TV may
interfere the radio reception;
The radio reception is too weak.
DC12V
20W
<1W
87.5-108.0MHz
20
33 ft. (10m)
CSR V2.1+EDR
USB/3.5mm Aux in
5 -35°/level status °
Causes
14
Solutions
Check the connection and
full insert the power plug
into the power socket.
Adjust the radio reception
position;
Turn up the volume;
Pair the Bluetooth device.
The radio will try to retune
performance a scan.
Move the unit away from
other device and try to re-
position the unit to get a
strong radio signal.