Atlantis Land A02-UP1-W54 Manual Del Usario página 46

•
WPA/WPA2: A RADIUS server is used to authenticate the connection for clients
and return authentication key parameters to the users to connect to the wireless
networking.
•
RADIUS (Remote Authentication Dial-In User Service) utilizes a RADIUS server
for authentication and the use of dynamic TKIP, AES, or WEP. Click on 802.11x
Settings in order to finish the configuration.
•
LEAP: Please insert username and password.
•
Open System: with the same WEP key between the stations, the stations don't
need to be authenticated, and this algorithm was set to default. Please select
WEP or 802.11x Settings in order to complete the configuration.
•
Shared Key: with the same WEP key between the stations in this Authentication
algorithm, this type will use packets with encryption by transferring a challenge
text which will be acknowledge by both side of the stations. In order to choose
which authentication algorithm will be used, you must know which one the station
supports this algorithm first. Please select WEP or 802.11x Settings in order to
complete the configuration.
How to configure WEP security:
If you select 64bit in Hex format, you must type 10 values in
the following range (0~F, hexadecimal), or 64bit in ASCII
format, you must type 5 values in the following range (0~9,
A~Z and a~z Alphanumeric).
If you select 128bit in Hex format, you must type 26 values
(0~F, hexadecimal), or 128bit in ASCII format, you must type
13 values in the following range (0~9, A~Z and a~z
Alphanumeric).
ASCII
64 bit 5*X
128 bit 13*X
X=[(0~9, A~Z, a~z Alphanumeric]
Y=[0~9, A~F Hexadecimal]
Be sure that the PCI/PCMCIA Adapter and the wireless station
(AP) were set in the same key.
HEX
10*Y
26*Y
ENGLISH
47