Control Buttons - Fermax SMILE Guía Inicio Rápida

START GUIDE FOR THE SMILE VDS TOUCH SCREEN MONITOR

CONTROL BUTTONS

Inductive loop
(depending on model)
HOW TO PROGRAM THE SMILE MONITOR
1. INSTALL
Monitor powered for the fi rst time.
The wildcard button blinking (red) indicates that the monitor has not
been programmed.
When the monitor is programmed, the red LED is off.
2. ENTER PROGRAMMING MENU
Press the button
PROGRAMMING FROM THE PANEL
1111
PROGRAMMING MENU
Select the icon
the monitor. Enter the calling code for this monitor from the panel (calling code for this monitor).
A different call tone sounds, confi rming the monitor´s programming. After a few seconds the
monitor returns to standby.
2
VDS SMILE MONITOR
Digital menu for internal parameter settings and confi guration.
Press for 3 seconds to access the installer menu and ring tone menu.
Short press to display the Shortcut buttons.
In conversation or only video, press to open the door.
In standby, call to guard unit (if applicable).
Audio activation and hang-up (hands-free functions)
Wildcard button (default function):
Press for 1 second to perform auto-start.
label,
With video, press and hold this button for 2 seconds to sequentially
select between the main camera and the secondary camera.
The SMILE monitor includes a touch screen that is deactivated by
pressing the off icon or after 60 seconds of inactivity.
for 3 seconds to access the "programming menu" or on the standby screen.
< 2 and half min
, a confi rmation screen appears confi rming the option and you hear a beep on
1

1111 by default
MASTER PANEL
Cod. 97892b V02_17