-
Assembly instructions of the steel bottom piece
1.
You should introduce the piece through the window of the tank as you can see in the following picture.
2.
The piece should be placed in the position you can see in the
following picture, it will remain on the sides, front slope and
pellet-loading pipe.
6.
SAFETY RULES DURING INSTALLATION
The way of installing the boiler will affect the safety and the proper operation. For this reason, it is essential that the installation is carried out
by qualified installers who are trained to make an installation compliant with local safety and installation regulations.
European, national, regional, provincial and municipal regulations.
Flue installations or smoke evacuation systems T must be controlled before the installation with respect to the following:
•
Prohibitions relating to the installation.
•
Legal distances.
•
Limits established by the local administration rules or generals provisions of the relevant authorities.
•
Conventional limits derived from the owner's community rules or contracts.
Overall, the installation must comply with all the regulation applicable according to local, national and European laws.
If your equipment is not properly installed, it may cause serious damage.
Before the installation, carry out the next series of checks:
•
Make sure that the floor can sustain the weight of the equipment and make a proper thermal isolation in the case that the floor is made
of flammable material (wood) or a material that can be affected by a thermal shock (plaster , for example).
If the equipment is installed on a floor which is not completely refractory or inflammable such as parquet, carpet, etc, it is necessary
to replace this part or introduce a fire-resistant base so that it protrudes beyond the front of the boiler 30 cm. Example of materials
include steel flooring, glass base or any other type of fire-resistant material.
•
Make sure that there is proper ventilation in the place where it is installed (air intake).
•
Avoid the installation in places where there are collective ventilation pipes, hoods with or without extractor, B type gas equipments,
heat pumps or equipments that can influence the flue draught The chimney draw may not be good if they are used at the same time.
•
Make sure that the smoke duct and the pipes used for the chimney are suitable for the operation of the boiler.
•
Make sure that all the equipments have their own smoke duct. Do not use the same duct for several equipments.
•
We recommend that you call your fitter in order to check both the chimney as well as the air flow for the combustion.
6.1.
SAFETY MEASURES
This boiler must only be used for its intended purpose. We can accept no liability for damage that occurs either directly or indirectly from the
use of this equipment to people, animals or things caused by an incorrect installation, adjustments and maintenance or the inappropriate use
of the equipment.
As explained at the beginning of this manual, the installation of this boiler must be done by qualified staff for this kind of installation. Overall,
the installation must comply with all the regulations according to local, national and European laws. In any case, we describe the following
requirements to take into account when installing the boiler:
a.
Keep any flammable or heat sensitive materials (furniture, curtains, and clothing) at a minimum distance of about 150cm.
b.
If the equipment is installed on a floor which is not completely refractory or inflammable it is necessary to replace this part or introduce
a fire-resistant base.
c.
Do not place the boiler near combustible walls or likely to be affected by a thermal shock.
d.
The boiler should only be used when the ash pan is inserted and the doors are closed (both of the combustion chamber and the ash
pan) as well as with the ash compactor (Hydroconfort model only).
e.
It is recommended to install carbon monoxide detector (CO) in the room where the equipment is installed.
f.
If you need a longer wire than the one provided use it always with an earthed plug.
g.
Do not install the in a bedroom.
h.
The boiler should never be turned on in the presence of emission of gases or vapours (e.g., linoleum glue, gasoline, etc). Do not place
nearby flammable materials.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
39
HYDROBOX, HYDROTEX AND HYDROCONFORT