Max RB655 Manual De Operación Y Mantenimiento página 17

Main switch
Battery pack
GREEN COLOR AREA
TORQUE ADJUSTMENT DIAL
RED COLOR AREA
(Only use under very low temperature)
Battery pack
Reinforcing bars Over-tightened
Appropriate
Tension adjustment
3
q Be sure to turn the Main switch OFF, to lock the Trigger and detach the Battery pack.
w The Torque Adjustment Dial allows you to adjust wire-twisting torque. By setting the
dial position at higher numbers, the wire-twisting torque is increased. If the Torque
Adjustment Dial is set at a higher position than required, the tie may break when the
tie gets stress or vibration. When wire breakage occurs, be sure to turn the Torque
Adjustment Dial counterclockwise until the wire breakage stops.
The Torque Adjustment Dial position in the red color area (7 to 8) is required only
when the tool is used under very low temperature (below 15F/-10˚C).
Always keep the Torque Adjustment Dial position in the green color area (1 to 6)
under normal ambient temperature.
e Insert the charged Battery pack into the main body until a click is heard.
WARNING:
When turning the Main switch to ON, keep hands away from the twisting parts
●
of the tool.
r Set the Trigger lock to UNLOCK and turn on the Main switch.
The Tie-Wire is fed automatically to the Arm unit and set in the required position.
t Test the tool again to check the tie strength.
y The tie strength is not appropriate, repeat procedures q∼t.
17