PIEPS DSP Pro Manual De Instrucciones página 26

S E A r C H - M o D E | S I G n A L S E A r C H
Press the main switch lock and push the main switch to
the "SEARCH" position.
Observe the course of the avalanche and make an exact
mental note of (1) where the victim was impacted by the
avalanche, (2) the point of disappearance. (3) The extension
of these points indicates the flow direction of the avalanche!
The primary search area is to the left and right of this.
You are now beginning with the search for initial detection. The PIEPS DSP PRO/DSP SPORT has a
circular receiving range and allows a direction and distance indication from the first signal (no special
method of operation necessary). All signals of the burials that are within the maximum receiving
range are received at the same time. To find the first signal walk along the defined search area in the
stated search-strip width quickly. The recommended search strip width is 60 m for PIEPS DSP PRO
/ 50 m for PIEPS DSP SPORT.
one rescuer with skis
for signal search
IMPortAnt!
All participants (including observers) must switch their devices to receiving
(SEARCH) mode. Always make sure there are no electronic devices (e.g. mobiles, radios) or solid metal items in the direct vicinity of the search.
26 | 08/13
one rescuer by foot
for signal search
1
3
1 Point of impact
2 Point of disappearance
3 Flow direction
More rescuers
for signal search
2