Using The Oven; Manual Operation - Teka HLF-940 Guía De Uso

Using the oven

Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the
glass control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
ELECTRoNIC CLoCK sETTINGs
Symbol : lights up during the TEKA Hydro-
clean function.
®
Symbol : lights up when the clock timer is
selected.
Symbol AUTO: lights up to indicate that the
oven is programmed.
Symbol : indicates that the oven is transmit-
ting heat to the food.
+ / – Sensors : enable you to select a time.
Sensors , and
gramme the electronic clock functions.
: enable you to pro-
sETTING THE TIME
• When you turn on the oven, you will see the
clock flashing 12:00.
• Set the clock by touching the + or – sensor.
You will hear 2 beeps confirming that the time
has been set.
• To change the time, press the + and – sen-
sors at the same time. The current time will
then flash on the screen. Change the time by
pressing the + or – sensors. Two beeps will
then confirm that the new time has been set.
NoTE
The clock light has a night mode so the dis-
play light will dim between 00:00 and 6:00
hours.

MaNUaL opERaTIoN

• After setting the clock, the oven is ready for
use. Select a cooking function and temp-era-
ture.
• During cooking, symbol
indicate that heat is being transmitted to the
food.
• This symbol turns itself off when the selected
temperature has been reached.
• Set the controls to
CaUTIoN
After cooking, you will notice that the oven
cooling system is still on. This is normal and
is used to cool the oven down quickly.
English
will light up to
to turn off the oven.
19
User's Guide