Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this troubleshoot-
ing guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's
Toll Free Number 1-800-263-2629 for assistance.
Problem
No power
Cabinet temperature too high
Condensation on the cabinet,
doors or fl oor
Possible Cause
A fuse in your home may be
blown or the circuit breaker
tipped.
Power surge.
Plug not fully inserted into wall
outlet.
Temperature setting.
Door not shut properly or opened
excessively.
Interior lights toggled on.
Recently added a large quantity of
warm bottles to the cabinet.
High humidity conditions in the
home.
Door not shut properly or opened
excessively.
9
What to do
Replace fuse or reset circuit
breaker.
Unplug the wine cooler, wait a few
seconds and then plug it back in
Make sure the 3-prong plug is fully
inserted into outlet.
Verify the temperature control
setting. Adjust if neccessary.
Ensure that the door is fully closed
and that the gasket is sealing.
against the cabinets. Open the
doors only as needed and for short
periods of time.
The interior lights are intended for
temporary lighting of cabinets for
display purposes only. They are not
intended to be left on for prolonged
time periods.
Limit the quantity of warm bottles
being introduced to the cabinet at
the same time. Attempt to stagger
the load introduction if possible.
The condensation will subside once
humidity conditions return to nor-
mal.
Ensure that the door is fully closed
and that the gasket is sealing.
against the cabinets. Open the
door only as needed and for short
periods of time
Tabla de contenido
