Final Assembly - Craftsman 536.249810 Manual Del Usuario

ASSEMBLY
HOW TO MOUNT THE GRASS BAG
1. Lift and hold the cover in the UP position (see Figure 11).
2. Mount the grass bag assembly into the slots of the support
brackets.
3. Make sure the grass bag assembly is aligned properly and
is free to rotate.
4. Lower the cover.
Grass Bag
Assembly
Support
Bracket
Cover
Figure 11
HOW TO ASSEMBLE THE HITCH EXTENSION
PLATE AND THE BAG PLATE BAFFLE
(o)
15x88
2. Fasten the middle of the hitch extension plate with bolt (P),
washer (Q) and nut (R).
2x53
(R)
(Q) 15x84
17x104
Assemble the sides of the hitch extension plate to the top
of the hitch plate (see Figure 12). Assemble the bag plate
baffle to the bottom of the hitch plate. Secure with two bolts
(M), two washers (N), and two nuts (O). Make sure to mount
the washers (N) and nuts (O) under the bag plate baffle.
Hitch Plate
Extension
Hitch Plate
(Q)
(P)
\
(R)
(N)
(o)
Bag Plate Baffle
(N)
_ (O) Figure 12
FINAL ASSEMBLY
1. Check all fasteners. Make sure all fasteners are properly
installed and are tight.
2. Check installation. Make sure all parts are correctly installed.
,_ WARNING: Make sure that the grass bagger is
properly assembled and correctly installed. The
Grass Bagger must only be used when fully as-
sembled and correctly installed.
F-020902L
10