JB Systems COB-PLANO Manual De Instrucciones página 9

ENGLISH
 G is used to set the intensity of the Green LED source. Use the + and – buttons to modify the intensity.
 B is used to set the intensity of the Blue LED source. Use the + and – buttons to modify the intensity.
Note: Maximum distance between the wireless remote and the fixture = +/- 10m
D. Controlled by a universal DMX-controller:
 Connect all units together. Refer to the chapter "Electrical installation for two or more units in DMX-
mode" to learn how to do this (don't forget to address all units properly!)
 Connect all units to the mains and turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
uses 3, 4 or 6 DMX-channels, depending on the DMX-mode you have selected in the menu. See the
different DMX charts below:
DMX Chart for the 3 channel DMX-Mode
Simple RGB control without master dimmer.
Channel:
1
2
3
DMX Chart for the 4 channel DMX-Mode
For RGB control with additional Master dimmer and functions like strobe and sound control.
Select this DMX-mode while using the LEDCON-02 Mk2 easy controller.
Channel:
1
2
3
4
DMX Chart for the 6 channel DMX-Mode
The most advanced DMX-mode with RGB-control and additional separate channels for master dimmer,
different strobe functions and color fade/sound control.
Channel:
1
2
3
4
5
6
MAINTENANCE
 Make sure the area below the installation place is free from unwanted persons during servicing.
 Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
 All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
 Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
 When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
JB SYSTEMS
®
Value: Function:
000-255 Red (0-100%)
000-255 Green (0-100%)
000-255 Blue (0-100%)
Value: Function:
000-255 Red (0-100%)
000-255 Green (0-100%)
000-255 Blue (0-100%)
000-190 Master dimmer (0-100%)
191-200 Sound control
201-247 Strobe (slow to fast)
248-255 Master dimmer full on
Value: Function:
000-255 Master dimmer (0-100%)
000-007 ON / Open
008-037 Random Strobe
038-067 Sound Strobe
068-255 Strobe Speed: Slow to Fast
000-007 No Function
008-247 Color Fade: Slow to fast
248-255 Sound Chase
000-255 Red (0-100%)
000-255 Green (0-100%)
000-255 Blue (0-100%)
7/51
USER MANUAL
COB PLANO