Tabla de contenido
Idiomas disponibles
Idiomas disponibles
without wearing adequate winter outer
garments..
Wear f ootwear that w ill
improve footing o nslipper,/surfaces.
4, Handle fuel w ith care; i tishighly
flammable.
(a) Use anapproved fuel c ontainer
(b} Never r emove fuel t ank caporadd
fuel t oa running engine o rhot
engine.
(c) Fill f uel t ank outdoors withextreme
care. N ever fillfuel t ank indoors.
(d) Replace fueltank c apsecurely and
wipe upspilled f uel
(e) Never store fuel o rsnow thrower
with fuelinthe tank inside o fa
building where f umes m ay reach
anopen flame orspark
(f) Check f uel s upply b efore
e ach use,
allowing space for expansion as
the heat of the engine (motor) and/
or sun can cause fuel to expand
5.
Use extension cords and receptacles
as specified by the manufacturer for all
snow throwers with electric drive
motors or electric starting motors
6.
Adjust the snow thrower height to clear
gravel or crushed rock surfaces.
7
Never attempt to make any adjustments
while the engine (motor) is running
(except when specifically recom-
mended by the manufacturer),
8.
Let engine (motor) and snow thrower
adjust to outdoor temperatures before
starting to clear snow.
9.
Always wear safety glasses or eye
shields during operation
or while
performing an adjustment or repair to
protect eyes from foreign objects that
may be thrown from the snow thrower.
OPERATION
1.
Do not operate this machine if you are
taking drugs or other medication which
can cause drowsiness or affect your
ability to operate this machine.
2.
Do not use this machine if you are
mentally or physically unable 1o operate
this machine safely.
3.
Do not put hands or feet near or under
rotating parts Keep clear of the
discharge opening at all times.
4
Exercise extreme caution when operat-
ing on or crossing gravel drives, walks,
or roads Stay alert for hidden hazards
or traffic.
5.
After striking a foreign object, stop the
engine (motor), remove the wire from
the spark plug, disconnect the cord on
electric motors, thoroughly inspect the
snow thrower for any damage, and
repair the damage before restarting and
operating the snow thrower
6
If the snow thrower should start to
vibrate abnormally, stop the (motor) and
check immediately for the cause
Vibration is generally a warning of
trouble..
7.
Stop the engine (motor) whenever you
leave the operating position, before
unclogging the auger/impeller housing or
discharge guide, and when making any
repairs, adjustments, or inspections
8.
When cleaning, repairing, or inspecting,
make certain the auger/impeller
and all
moving parts have stopped Disconnect
the spark plug wire and keep the wire
away from the plug to prevent accidental
starting.
9..
Take allpossible
precautions when
leaving the snow thrower unattended
Disengage the augerlimpeIler,
stop
engine, and remove key
10
Do not run the engine indoors, except
when starting the engine and for
transporting the snow thrower in or out
of the building. Open the outside doors;
exhaust fumes are dangerous (contain-
ing CARBON
MONOXIDE, an ODOR-
LESS and DEADLY GAS).
tl
Do not clear snow across the face of
slopes. Exercise caution when changing
direction on slopes. Do not attempt to
clear steep slopes
12
Never operate the snow thrower without
proper guards, plates or other safety
protective devices in place.
13
Never operate the snow thrower near
glass enclosures, automobiles, window
wells, drop-offs, and the like without
proper adjustment of the snow discharge
angle Keep children and pets away.
14.. Do not overload the machine capacity by
attempting to clear snow at too fast a
rate.
15. Never operate the snow thrower at high
transport speeds on slippery sudaces..
Look behind and use care when
backing.
16
Never direct discharge at bystanders or
allow anyone in front of the snow
thrower
17. Disengage power to the auger!impeller
when snow thrower is transportedor
not
in use.
18
Use only attachmenls and accessories
approved by the manufacturer of the
snow thrower (such as tire chains,
electric start kits, etc).
Tabla de contenido
