RIB JOLLY BIG ONE Manual Del Usaurio página 31

J-CRX ELECTRONIC CONTROL PANEL FUNCTIONS
Control of 1 JOLLY BIG TWO
Control of 2 JOLLY BIG ONE mounted on the same shutter (works only one group of limit switches)
Operation with time
Automatic closure
Step by step control or automatic
Exclusion of the total automatic close function
CRX Type with radio receiver built inside
Microprocessor autotest on the security imputs according to EN12453 point 6.2.1.7
Flasher with card or courtesy light with timer (2 minutes)
Adjustment of the force through trimmer
Led to segnalise the board state
Management of the photocells
Management of the safety strips
Safety strip autotest as required by EN12453
CONTROL AND SAFETY ACCESSORIES
ELECTRO-BRAKE
Utilized for all JOLLY BIG versions as a safety system in case of shutter with damaged springs
(Only one electro-brake for JOLLY BIG ONE and JOLLY BIG TWO). Fed by a motor, equipped with
cable, sheath, release knob in case of black-out.
NC
NO
C
S
S
AD-
AD-
A*A+
A*A+
code ACJ9019
POWER
PAIR OF HALF-SHELLS
Utilized to mount JOLLY BIG motors on shafts of smaller diameter (76 mm), also being
previewed for advanced diameters (120 mm).
In nylon.
- Dim. = Ø 76 => Ø 102 mm
31
J-CRX 120/60Hz - code ABJ7079
J-CRX 230/50-60Hz - code ABJ7080
CLOSE OPEN
COM
LSC LSO
code ACJ9058
G
B