Eldom miko SI1000 Instrucciones De Uso página 11

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Before the first use, all parts of the appliance that are in contact with food must be
thoroughly washed (see: Cleaning and maintenance).
For the best results, use milk with fat content over 3.0%.
Warm milk frothing
• Place the tank (7) in the base (8).
• Set the spring (5) on the tip (4).
• Pour milk into the tank in the volume not exceeding the maximum level -
• Place the lip (1) with the sealing gasket (2) and the frothing tip.
• Activate the appliance with the button (9). The control light will go on (9) to start the
frothing process.
• The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (9).
• Then remove the lid (1).
• While holding the appliance by the handle (3), remove the tank (7) from the base and
pour out the milk to a cup. If needed, use a wooden spoon so as not to damage the coat
of the tank.
Cold milk frothing
• Place the tank (7) in the base (8).
• Set the spring (5) on the tip (4).
• Pour milk into the tank in the volume not exceeding the maximum level -
• Place the lip (1) with the sealing gasket (2) and the frothing tip.
• Activate the appliance with the button (10). The control light will go on (10) to start the
frothing process.
• The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (10).
• Then remove the lid (1).
• While holding the appliance by the handle (3), remove the tank (7) from the base and
pour out the milk to a cup. If needed, use a wooden spoon so as not to damage the coat
of the tank.
Heating up milk
• Place the tank (7) in the base (8).
• Make sure that the spring (5) is removed from the tip (4).
• Pour milk into the tank in the volume not exceeding the maximum level -
• Place the lid (1) with the sealing gasket (2) and the mixing tip.
• Activate the appliance with the button (9). The control light will go on (9) and the
heating process will start.
• The appliance will switch off automatically, and the control light will go off. The appliance
may be turned off at any time with the button (9).
• Then remove the lid (1).
• While holding the appliance by the handle (3), remove the tank (7) from the base and
pour out the milk to a cup.
CZ
11
Tabla de contenido
loading

Tabla de contenido