MidRone SKY 180 Guía De Usuario página 30

Before each flight you must establish the link between the drone and remote control by performing
this operation: Push the left joystick fully upward and then pull it to the bottom. The LED lights are
now fixed, it means that the drone is ready for take-off.
At this time simply press the « Auto take-off » button and the drone will take-off and hover at
approximatively 1-2 meter height.
You can now start to pilot the drone with the joysticks of the remote controller.
If you press this key again, the drone will land automatically.
FLYING CONTROLS
ALTITUDE CONTROL (left joystick)
Push the left joystick up: the drone rises.
Pull the left joystick down: the drone descends.
LEFT / RIGHT TURN (left joystick)
Push the left joystick to the left: the drone turns on itself to the left.
Push the left joystick to the right: the drone turns on itself to the right.
FORWARD / BACKWARD FLY (right joystick)
Push the right joystick up: the drone flies forwards.
Push the right joystick down: the drone flies backwards.