Error Indications; Cleaning; Restoring Factory Settings - Alpha IP HAP 21001 Manual De Instrucciones

7.2 Error indications

Display Meaning
Quick flashing No connection to
in yellow network or router
Continuous No Internet con-
lighting in nection
yellow
Quick flashing Update error
in red
Quick flashing Preliminary step
in orange for restoring the
factory settings
Long lighting Reset failed
in red
Clean the device with a soft, clean, dry, and lint-free cloth. The
Solution
cloth may be moistened with lukewarm water for the removal
Connect the Access
of heavier contamination. Use a solvent-free cleaning agent for
Point to the router.

cleaning.

Check the Internet
connection and the
firewall settings.
All settings will be lost when the factory settings are restored.
Check the server and
The factory setting of the individual Alpha IP components must
Internet connection.
Restart the Access
also be restored.
Point by shortly dis-
connecting it from the
1. Disconnect the Access Point from the power supply. Pull the
power supply.
Press the System key
2. Connect the base station again to the power supply and press
again for 4 seconds
until the LED lights up
in green.
3. Release the System key.
Repeat the process.
4. Press the System key again for 4 seconds until the LED lights
5. Release the System key again.
9 The device restarts.
The factory settings are reset.
8 Cleaning
9 Resetting factory settings
mains plug for this.
the System key simultaneously for 4 seconds until the LED
flashes rapidly in orange.
up in green.
Displays/Cleaning/Factory settings
21