Push The Control Dial In To Start - Amana ND-1 Guía De Uso Y Cuidado

Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate, Medium (select models) or
Regular temperature settings. For timed drying, turn
the control dial until the pointer points to the proper
time setting in the Time Dry/Air Fluff cycle.
Note:
Using the Air Fluff temperature setting will
require a longer drying time.
Damp Dry
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry will
provide 20 minutes of tumbling time, followed by
10 minutes of cool-down tumbling.
Touch Up/Refresh
Touch Up/Refresh will release wrinkles from items that
are clean and dry but only slightly wrinkled, such as
from a crowded closet or suitcase, or from sitting in
the dryer too long after the cycle has ended. Touch
Up/Refresh provides 10 minutes of tumbling followed
by 10 minutes of cool-down tumbling and can be used
with any temperature selection.
Cycles and options may vary by model.
STEP 4
Push the Control Dial in
to Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Note:
The dial can be turned in either direction to
select a cycle. Once started, the dial will not
advance at a specific rate during the Auto Dry
cycles. At first the dial may not advance at all.
Toward the end of the cycle (when the load begins
to dry), the dial will advance at a more regular rate
and much more quickly. This is normal operation.
4