Niagara ECO IQ N9195 Instalación E Instrucciones De Operación página 15

CHANGE SET TEMPERATURE
1. The system switch must be set to COOL or HEAT to adjust the set temperature.
2. If the or key is pressed once and released, the set temperature will increase or decrease by one degree.
Press and hold the
3. Changing the set temperature automatically puts the thermostat in Temporary hold.
4. Changing the set temperature does not affect the programmed Temporary or Vacation hold.
KEY LOCK FEATURE
Setting the Key Lock
Follow the steps below to set a 3-digit passcode to lock or unlock the thermostat.
1. Press and hold the UP and DOWN keys at the same time for 3 seconds to enter the Key Lock Setting mode.
2. "- - -" will appear on the LCD with a flashing "key" icon.
Press the UP or DOWN keys to select the first digit [e.g. "3 - -"], then press PROG to move to the next digit
and repeat until your 3-digit code is displayed. To change a digit, press PROG to cycle through.
3. Press RUN to save. The 3-digit code flashes twice, remains on the screen for 2 seconds and then returns to
normal time mode.
or key to scroll to desired temperature and release.
INSTRUCTIONS
Key Lock Setting mode
with flashing key icon.
15