Installation With Adhesive Strips; Installation With Screws - Alpha IP WTHP 61001 Serie Manual Del Usaurio

5.2.1 Installation with adhesive strips

Depending on the surface, installation can be performed with the supplied dou-
ble-sided adhesive tape or with the supplied screws. Installation is possible on dif-
ferent surfaces as e. g. masonry, furniture, tiles, or glass.
Ö The commissioning is finished and the device is readily assembled.
1. Select a suitable installation position.
In case of an installation with adhesive strips the installation surface must
be even, smooth, undamaged, clean, and free from grease and solvents.
2. Remove the protective foil from one side of the adhesive strip.
3. Stick the adhesive tape on the back side of the mounting plate in the recesses
provided for this purpose (see fig. 4 page 4).
4. Remove the protective foil from the other side of the adhesive strip.
5. Align the device horizontally at the desired position and press it on the surface.

5.2.2 Installation with screws

1. Select a suitable installation position.
2. Ensure that no lines are laid at this position.
3. Remove the mounting plate from the device.
4. Position the mounting plate on the installation place. The arrow on the front
Commissioning
43