Teach-In To Alpha Ip Access Point - Alpha IP WTHP 61001 Serie Manual Del Usaurio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

1. Select the desired channel at the Alpha IP base station (see Alpha IP Base station
instructions).
2. Press the System key (A) of the Alpha IP base station for 4 seconds, until the LED
of the System key flashes rapidly in orange.
9 The device LED starts to flash in orange.
3. Pull the room control unit Display S from the interchangeable frame (see fig. 5
page 4).
4. Pull out the insulating strip from the battery compartment, or insert batteries If
batteries have already been inserted, press the system key (D) for at least 4 sec-
onds in order to activate the teach-in mode.
9 The teach-in mode is activated automatically for 3 minutes.
9 The device LED flashes in orange.
The LED will light up in green after a successful teach-in process. If the LED
lights up red, repeat the process.

5.1.2 Teach-in to Alpha IP Access Point

For a control via the Alpha IP app, the teaching-in must of the WTHP 61001-xx must
be performed via the Access Point (HAP 21001). Teach-in the device as follows:
Ö The Alpha IP Access Point has been set up via the Alpha IP App (see instructions
HAP 21001).
Commissioning
41
Tabla de contenido
loading

Tabla de contenido