Using Extra Cameras; Frequently Asked Questions (Faq) - Luda Elektronik trailerCam Guia Del Usuario

9. Using extra cameras

You can use up to 3 additional cameras with your trailerCam solution. We recommend that you pair the
camera with your monitor before mounting it on your machine.
Pairing camera and monitor
1. Connect the camera to a power source according to the instructions in chapter 8.
2. On the monitor, go to menu mode and go down to Pair Cam. Choose the channel you wish to use
for the new camera. (A channel not used by a camera you already have installed.)
3. Press the Pair camera button on the monitor. A 60 second countdown will start.
4. Within the 60 second countdown, press the pair button on the camera.
5. Mount the camera in the desired position after making sure the signal strength is good enough.
Switching between the cameras on the monitor
Make sure you have chosen the ON option in the menu for the cameras you wish to switch between.
Press the camera button to switch between the cameras. Cameras set to OFF in the menu will not be
displayed even though they are supplied with power.
QUAD
Turn this option on to view all channes on a split screen.

10. Frequently Asked Questions (FAQ)

1. Is the signal between the camera and the receiver encrypted?
Yes.
2. What does a clear "line of sight" mean?
A clear line of sight means that no objects (walls, trees etc.) can be found between the camera and the
receiver. Metal substantially weakens the signal.
3. Why does the signal quality decrease when the camera or LCD-monitor is in motion?
When driving som interference might appear in the picture. This is due to the fact that the signal to the
receiver is constantly transmitted from different angles. This is considered normal when transmitting
wirelessly.
4. Is the camera water resistant?
The camera in your trailerCam-solution is classed as IP66. This means that the camera is well
protected from both dust and humidity. It is capable of being placed outside when raining or in damp
environments.
5. Can I hear sound from the camera?
No, the camera does not have a microphone. The monitor does have sound support however.
6. What do I do if I have bad reception on the LCD-monitor?
Start by reading through the troubleshooting chapters (11). Temporary interference is considered
normal in wireless transmissions. If troubleshooting doesn't help, visit
www.trailercam-europe.com
7. Further questions?
You are always welcome to visit our website www.trailercam-europe.com or to contact us in another
way (see chapter 15, Contact us).
- 27 -
DE
EN
ES FR
FI
SV
FR
IT
PL
SV