Positioning the Booster Seat and Securing Your Child
Sit your child in the booster seat.
6
Pull the vehicle seat belt out, then
7
route the lap part of the vehicle seat
belt under both armrests and over both
base belt guides (Fig. F).
NOTE: The shoulder part of the vehicle seat
belt should be routed under the armrest on the
buckle side.
Verify the vehicle seat belt is not twisted
8
and then fasten across the child (Fig. G).
Route the lap part of the vehicle seat belt
9
through the SecureGuard clip (Fig. H).
* The lap part of the vehicle seat belt should
rest low on the child's upper thighs.
Remove slack from the vehicle seat belt.
10
* Proper positioning is achieved when the
shoulder belt lies across the center of the
child's chest and is positioned at or above
the child's shoulder.
Checklist
9 ISOFLEX
adjuster straps and vehicle seat belt are not twisted.
9 Vehicle seat belt is securely fastened.
9 Lap part of the vehicle belt is routed through the SecureGuard clip and
rests low on child's upper thighs.
9 Vehicle seat belt is properly positioned.
28
Positioning the Booster Seat and Securing Your
Child with Backrest
F
NOTE: Before using the booster seat for the first
time, you will need to complete the assembly
instructions on page 14.
G
1
2
NOTE: Verify the booster seat is compatible with
your vehicle (see page 10).
H
3
4
Positioning the Booster Seat and Securing Your Child
BEFORE YOU BEGIN:
9 If the vehicle seat back is adjustable, ensure it is in the upright
position before placing the booster seat on the vehicle seat.
9 Adjust the head restraint appropriately to fit child (see page 17).
Place the booster seat on the vehicle
seat.
Push the backrest until it rests against
the vehicle seat back (Fig. A). If the
vehicle seat back is adjustable, move it
to the upright position.
Sit your child in the booster seat and
check the head restraint for proper
height adjustment (Fig. B).
Pull the vehicle seat belt out and route
the shoulder part of the vehicle seat belt
through the shoulder belt guide (Fig. C).
a
B
C
29