Idiomas disponibles
Idiomas disponibles
INSTALLATION
Connection at Fixture
CrNss Cablt InsoallaoiNn
1.
Insert Barrel Terminal into corner hole. (Figure 1.)
2.
Fully insert Toggle through corner hole.
Tilt vertically to pass
through mounting hole.
Figurt 1.
Cable/Gripper Installation
Slide Cable Coupler onto Main Suspension Cable and
secure Coupler to appropriate mounting point at ceiling.
(Figure 2.)
Install Cable Gripper onto Main Suspension Cable.
Insert Cross Cable into Cable Gripper and install
thumbscrew. Loosen thumbscrew to level fixture.
Re-tighten as necessary once fixture leveling has been
completed.
Adjust Main Cable to desired length and cut excess cable if
necessary. (Figure 4.)
Install CABLE CRIMP prior to cutting cable.
N
Note:
*Fixture Shown with
LED Downlight Kit
Figurt 2.
2
Installation Instructions – Jaylum Suspended LED Luminaire
12" Aircraft Cable with Barrel
Terminals and Steel Toggles
(included).
InsoallaoiNn InsorucoiNns – Jaylum Susptndtd LED Luminairt
ADE141250
N
Note:
Please refer to Corelite "Connection at Ceiling"
instructions for detailed information on various
mounting methods.
Power Feed
J-BOX
(by others)
Cable
Coupler
Cable
Figurt 3.
Figurt 4.
Mount Spacing
Fixture Length
Power
Sample Row
Fixture Length
*For Continuous Rows See Joining Sheet.
Figurt 5.
Power Drops/Knock-Outs
Break off appropriate KO, slide power cord through KO
opening, then secure power cord with strain relief.
N
Note:
Location of the KO's varies depending on fixture
Figurt 6.
www.cooperlighting.com
Non-Power Feed
Cable
Coupler
SJT Cord
Cable
Cable Crimp
96" Spacing
96" Spacing
5/8"-7/8" Knock Out
