General Specifications - Klein Tools LAN Scout Jr. Manual De Instrucciones

ENGLISH
The Klein Tools LAN Scout™ Jr. is a portable data cable tester. It tests and
troubleshoots RJ45 terminated cables and provides built-in tone generation
for cable tracing.
•
Dimensions:
4.0 oz. (115 grams) with battery and remote
•
Weight:
•
Operating Temperature:
• Storage Temperature:
• Humidity: 10% to 90%, non-condensing
• Maximum Voltage
• RJ Jack:
• Battery Life
• Standby:
• Active:
•
Cable Types:
Cat-4, Cat-3
•
Maximum RJ Cable Length:
•
Minimum Cable Length for Split Pair
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• The LAN Scout™ Jr. is designed for use on unenergized cabling
systems. Connecting the LAN Scout™ Jr. to live AC power may
damage it and pose a safety hazard for the user.
• Poorly terminated RJ plugs have the potential to damage the jack on
the LAN Scout™ Jr. Visually inspect a RJ plug before inserting it into
the tester. The contacts should always be recessed into the plastic
housing of the plug. Plugging 6-position plugs into the 8-position
jack on the tester has the potential to damage the outer-most
contacts of the jack unless the plug is specifically designed for
that purpose.
WARNINGS:
Always wear approved eye protection.
Do NOT use on energized circuits.
2
LAN Scout™ Jr.
Instruction Manual

GENERAL SPECIFICATIONS

4.6" x 2.3" x 1.1" (11.7 x 5.8 x 2.8 cm)
0°C / 32°F to 50°C / 122°F
-20°C / -4°F to 60°C / 140°F
between any two connectors pins without damage:
66V DC or 55V AC
typical: 6V alkaline batteries - 4 x LR44
3.5 years
80 hours
Shielded or Unshielded; Cat-7, Cat-6x, Cat-5E, Cat-5,
0 to 1000 feet (305 meters)
WARNINGS
Detection: 1.5 feet (0.5 meters)