Troubleshooting - Bemer 3000 Manual Del Usuario

13. Troubleshooting

Problems with the control unit
No indicator light
Cause
Power supply unit not connected
to the electrical outlet.
Power supply unit not connected
to the control unit.
Control unit not switched on.
Power supply unit or control unit
defective.
No intensive applicator indicator light
Cause
Applicator is not connected.
BEMER Control detects no signal,
applicator or control unit defective.
84
english
Solution
Connect the power supply unit
to the electrical outlet.
Connect the power supply unit
to the control unit.
Press the ON button.
Send the power supply unit and / or
the control unit to the manufacturer
or a manufacturer authorized dealer.
Solution
Connect the intensive applicator
to the control unit.
Send the applicator and / or the
control unit to the manufacturer
or a manufacturer authorized dealer.