Start Up Procedure - Bemer 3000 Manual Del Usuario

8. Start up procedure

You should regularly check your BEMER
complete system, at least each time before
starting the unit:
The BEMER complete system may only be used
or stored in rooms where it is protected from
dust, humidity, dripping or splashing water.
The unit should be operated under
the following ambient conditions:
8.1 Control unit – coil mat
1. Connect the power supply unit plug
to any socket on the control unit and
attach firmly.
60
english
The cable
The control unit
The power supply unit
The coil mat
The intensive applicator
Temperature: 10 °C to 40 °C / 50 °F
to 104 °F
Relative humidity: 30 to 75 %
non-condensing.