Klarstein BellaVita Manual De Instrucciones página 17

• Put on the milk tank cover, insert the milk tank assembly into the correct position.
Adjust the angle of milk foam spout to the right place by using the milk frothing
lever. This machine enables the user to adjust the foam ratio by rotating the knob
from Max to Min to enjoy the desired foam.
• Place single cup filter insert in sieve holder.
• Fill the filter with fine ground espresso coffee, press the coffee powder down into
the filter, using the flat end of the measuring spoon to help.
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the cappuccino button.
• The button will be illuminated white and the unit will start working. The pump will
work intermittently to pump the water and the milk foam will come out to your cup
first. After the milk foam finished, the unit starts to brew the coffee into the cup.
• The cappuccino brewing cycle will complete once the unit beeps once.
(4) Latte Brewing
• To detach the milk tank assembly, carefully hold the milk tank by one hand, and
press the button on right side of milk tank cover by another hand to remove the milk
tank assembly, gently move out the milk tank assembly to the side at the same time.
• Remove the milk tank cover by pressing the release button on the side of the milk
tank cover, flipping it up to one side and taking it off.
• Add the milk into the milk tank. Always fill the milk beneath the max mark. The
suggested temperature for milk is 4-8 °C.
• Put on the milk tank cover, insert the milk tank assembly into the correct position.
Adjust the angle of milk foam spout to the right place by using the milk frothing
lever. This machine enables the user to adjust the foam ration by rotating the knob
the Max to Min to enjoy the desired foam.
• Place one single cup filter insert in sieve holder.
• Fill the filter with fine ground espresso coffee, press the coffee powder down into
the filter, using the flat end of the measuring spoon to help.
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the latte button.
• The button will be illuminated white and the unit will start working. The pump will
work intermittently to pump the water and the milk foam will come out to your cup
first. After the milk foam finished, the unit starts to brew the coffee into the cup.
• The latte brewing cycle will complete once the unit beeps once.
EN
Important: Clean the
milk frothing system
after each use to avoid
any milk residue. User
can simply wash the
milk tank and clean the
tube under tap water,
then fill in the milk tank
with clean water and
press clean button.
17