Picture Display Mode; Switching The Picture Display Mode - Sharp PG-A10X Manual De Instrucciones

Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose "NORMAL", "DOT BY DOT",
"BORDER" or "STRETCH" image.
Switching the Picture Dis-
play Mode
Press .
• Pressing
changes the display as shown on
pages 40 and 41.
• To return to the standard image, press
"RESIZE" is displayed on the screen.
COMPUTER
4:3 aspect ratio
Other aspect ratios
Input Signal
Computer
PG-A10X PG-A10S
Resolution Resolution
lower than lower than
XGA SVGA
XGA SVGA
Resolution Resolution
higher than higher than
XGA SVGA
SXGA (1280 × 1024)
1280 × 720
*
Mode for projecting an image with the original aspect ratio without cutting any portions.
40
A10X_A10S#E_Print#p40_50.p65
while
NORMAL
PG-A10X PG-A10S
SVGA (800 × 600)
XGA (1024 × 768)
1024 × 768 800 × 600
SXGA (1280 × 960)
SXGA+ (1400 × 1050)
SXGA (1280 × 1024) 960 × 768 750 × 600
1280 × 720
—
NORMAL
Projects a full screen
image while maintaining
Image type
the aspect ratio.
*
4:3 aspect ratio
*
4:3 aspect ratio
*
4:3 aspect ratio
*
5:4 aspect ratio
16:9 aspect ratio
40
UNDO
button
DOT BY DOT
PG-A10X PG-A10S PG-A10X
800 × 600
—
1024 × 768
—
768 × 576
1280 × 960 1280 × 960
1400 × 1050 1400 × 1050
1280 × 1024 1280 × 1024 720 × 576
— — — —
Output screen image
DOT BY DOT
Projects the original Projects 4:3 image fully
resolution signal of in STRETCH (the following
the image.
* *
*
*
*
: Cutout area on which images cannot be projected.
: Area where the signals are off screen.
03.2.4, 3:02 PM
RESIZE
button
BORDER STRETCH
PG-A10S PG-A10X PG-A10S
600 × 450 1024 × 576 800 × 450
562 × 450 960 × 576 750 × 450
1024 × 576 800 × 450
—
BORDER STRETCH
Projects 16:9 image
evenly over entire screen
column) image. (top/bottom blank bands).
*