Gamma (Gamma Correction); Srgb (Srgb Setting); Signal Type (Signal Type Setting); Memory (Storing And Selecting The Adjustment Settings) - Sharp PG-A10X Manual De Instrucciones

Gamma
(Gamma Correction)
Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the bright-
ness of the brighter portions.
When you are displaying images with frequent dark
scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature
makes the dark scenes easier to see and gives the
impression of greater depth in the image.
Select "Gamma" on the "Picture" menu and
the desired gamma mode.
Description of Gamma Modes
Selectable settings
Standard For standard image
Presentation Brightens darker portions of image for
more enhanced presentations.
Cinema Gives greater depth to darker portions
of image for a more exciting theater
experience.
Game For natural color gradation for playing
a game, etc.
Note
• Gamma is not available for INPUT 1 when
"sRGB" on the "Picture" menu is set to "ON".
sRGB
(sRGB Setting)
Select "sRGB" on the "Picture" menu and set
it to " (ON)" when you want to display
the image in a natural tint based on an origi-
nal image.
Note
• When "sRGB" is set to "ON";
• Gamma is not available.
• "Red", "Blue" or "CLR Temp" on the "Picture"
menu cannot be adjusted.
• For additional information about the sRGB func-
tion, visit "http://www.srgb.com/".
Info
• When "sRGB" is set to "ON", the projected im-
age may become dark, but this does not indi-
cate a malfunction.
A10X_A10S#E_Print#p32_39.p65
Description
37
Signal Type
Setting)
Select "Signal Type" on the "Picture" menu
and set it to "RGB" or "Component" for IN-
PUT 1.
Description of Signal Type Settings
Selectable settings
RGB Set when RGB signals are received.
Component Set when Component signals are
received.
Memory
(Storing and Selecting the
Adjustment Settings)
Use this function to store the adjustment settings
on the "Picture" menu. No matter which input mode
or signal type is selected, you can select and apply
the settings you have stored in a memory location.
Select "Memory" on the "Picture" menu and
the memory location where you want to store
the settings. Then adjust the setting items
on the "Picture" menu.
Description of Memory Positions
Selectable
Description
settings
Memory 1
Settings of all items on the "Picture"
Memory 2
menu can be stored in memory location.
Memory 3 The stored settings can be selected in
Memory 4 any input mode.
Memory 5
Besides "Memory 1" to "Memory 5", other
Memory OFF
settings on the "Picture" menu can be
stored for each input mode. The settings
stored in "Memory OFF" cannot be applied
when another input mode is selected.
If you want to apply the stored settings on
the "Picture" menu, select "Memory" on the
"Picture" menu and the memory location
where you have stored the settings.
Note
• You can change the stored settings after se-
lecting the memory location for those settings.
03.2.4, 2:05 PM
(Signal Type
Description
37