CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands
WARNING
of water fi lters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of a
generic water fi lter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change your
water fi lter cartridge.
To give you time to get a new fi lter,
the red light comes on just before the
capacity of the current fi lter runs out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
1.
fi lter ( 1 ) about 1/4 turn, counter-clockwise.
2.
Pull the water fi lter (
To change the water fi lter more easily,
Sometimes it is hard to disassemble the water
fi lter because impurities in the water cause it
to stick. If you are having diffi culties, grip the
water fi lter fi rmly and pull it hard.
When you pull the
water fi lter, a little
water can leak from
the opening. This is
normal. To minimize
the water leaks, keep
the fi lter cartridge horizontal when you pull it.
o T
p
e r
e v
t n
v o
r e
o fl
( 3 ) and dry around the fi lter case ( 2 ).
3.
Insert the new fi lter into the fi lter case ( 4
4.
Push the fi lter, and then turn it clockwise until it
locks.
If you have trouble inserting the water
fi lter because of high water pressure,
The locked symbol should be lined up
with the indicator line.
14_
operating
(Red)
1 ) from the case fi lter ( 2 ).
w
e ,
m
p
y t
h t
e
w
t a
r e
t l fi
r e
5.
After removing the old
water fi lter and installing
a new reset the indicator
by pressing the "Fridge"
and "Power Cool" button
simultaneously for about 3
seconds.
6.
on.
For a replacement water fi lter, you can
visit your local home Improvement center
or contact the Samsung Parts distributor.
Be sure the replacement water fi lter has
the SAMSUNG logo on the box and
on the water fi lter. Link : http://www.
samsungparts.com
Removing any residual matter inside
the water supply line after installing
2
the water fi lter.
1.
Turn ON the main water
1
supply and supply water
to the refrigerator.
2.
Run 1 Gal of water through
the
dispenser until the
water runs clear (approx.
6 to 7 minutes). This will
clean the water supply system and remove air
from the lines.
3.
If after pour 1 Gal the water doesn't turn clear is
2
4.
Open the Refrigerator door and make sure
there are no water leaks coming from the
3
water fi lter.
Be sure to fl ush the dispenser system thoroughly,
otherwise water may drip fr om the
r t
y a
dispenser.
This means that there is still air in the line.
).
4