Manoeuvring - AL-KO AMS Mammut Manual Del Usuario

Ocultar thumbs Ver también para AMS Mammut:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62

Manoeuvring

The „Maximum climbing power" LED
goes out.
The „Maximum drive temperature" LED
stays lit.
4. Switch off the remote control.
The remote control is now in operating mode 1,
the Caravan can now rotate on the position.
ADVICE
Should you have any questions or re-
quire clarification of any points, please
contact our AL-KO Service or your instal-
lation workshop.
MANOEUVRING
The speed and direction are steplessly controlled
using the joystick on the remote control.
To improve your orientation and avoid operating
errors, we recommend holding the remote control
in the normal direction of travel (not in the current
manoeuvring direction).
1
4
2
1
Forward motion area
2
Reverse motion area
3
Turning area, clockwise rotation on the
spot
4
Turning area, anticlockwise rotation on
the spot
Manoeuvre slowly and carefully!
Move the joystick gently so thatyou do not put
yourself at risk by manoeuvring too fast or da-
mage your towing vehicle or caravan.
Move the joystick with care!
Do not move the joystick directly from a forwards
(1) or reverse motion (2) to one of the two turning
areas (3 or 4). This could cause the caravan
to turn unexpectedly. Always select the turning
areas (3 or 4) separately with the joystick.
694 873_b
3
ADVICE
We recommend practising manoeuvring
with the AL-KO Mammut on open
ground.
Maintain a substantial safety distance
from per-sons and property. If the remote
control is switched off at the ON/OFF
switch on the side, the Mammut drive is
switched off immediately. All motion is
stopped.
ADVICE
There can be isolated interruptions du-
ring the manoeuvring procedure as a re-
sult of external influences (e.g. powerful
radio transmitters).
Explanation of the joystick functions for con-
trol
*
Fig. 7: Mammut explanation control
* X = Dead centre area
Clearances when turning
Fig. 8: Clearances when turning
*
25
Tabla de contenido
loading

Tabla de contenido